[Fwd: Re: [packman] transcode]
Peter Czanik
pczanik at fang.fa.gau.hu
Sun Apr 2 09:13:31 CEST 2006
Hello,
Rainer Lay wrote:
> Hi Peter,
>
> this is strange. Are you sure, you are compiling version 1.0.2? Are you
> using my spec file? Here is there relevant part from my build:
>
Yes, I'm sure in both of them. It compiles fine on PPC too, when it's
not built with y2pmbuild. But compiling with y2pmbuild, these problems
are reproducible. I already added some extra buildrequires, as this list
was a lot longer, but I can't solve these two.
To compile on PPC I also had to ifarch out the 'nasm' requirement.
To satisfy y2pmbuild, I added BuildRequires: libvorbis
libvorbis-devel libmpeg3 libmpeg3 mjpegtools mjpegtools-devel
ImageMagick ImageMagick-devel xorg-x11-libs, but it still does not seem
to be enough, and has the troubles mentioned earlier.
Bye,
CzP
>
>> || test ! -s conftest.err
>> configure:40130: $? = 0
>> configure:40133: test -s conftest
>> configure:40136: $? = 0
>> configure:40149: result: yes
>> configure:40218: checking whether mjpegtools support is requested
>> configure:40233: result: yes
>> configure:40273: checking for pkgconfig support for mjpegtools
>> configure:40280: result: yes
>> configure:40292: checking for mjpegtools-config
>> configure:40310: found /usr/bin/mjpegtools-config
>> configure:40323: result: /usr/bin/mjpegtools-config
>> configure:40336: checking how to determine MJPEGTOOLS_CFLAGS
>> configure:40345: result: pkg-config
>> configure:40390: checking mjpegtools/yuv4mpeg.h usability
>> configure:40402: gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -march=i586 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -O2 -g -march=i586 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -I/usr/include/mjpegtools -I/usr/include/mjpegtools/mpeg2enc -I/usr/include/mjpegtools/mplex conftest.c >&5
>> configure:40408: $? = 0
>> configure:40412: test -z
>> || test ! -s conftest.err
>> configure:40415: $? = 0
>> configure:40418: test -s conftest.o
>> configure:40421: $? = 0
>> configure:40431: result: yes
>> configure:40435: checking mjpegtools/yuv4mpeg.h presence
>> configure:40445: gcc -E -O2 -g -march=i586 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -I/usr/include/mjpegtools -I/usr/include/mjpegtools/mpeg2enc -I/usr/include/mjpegtools/mplex conftest.c
>> configure:40451: $? = 0
>> configure:40471: result: yes
>> configure:40506: checking for mjpegtools/yuv4mpeg.h
>> configure:40513: result: yes
>> configure:40546: checking how to determine MJPEGTOOLS_LIBS
>> configure:40555: result: pkg-config
>> configure:40595: checking for y4m_si_get_height in -lmjpegutils
>> configure:40625: gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -march=i586 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -O2 -g -march=i586 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -L/usr/lib -L/opt/gnome/lib -lglib conftest.c -lmjpegutils -lm -lz -ldl >&5
>> configure:40631: $? = 0
>> configure:40635: test -z
>> || test ! -s conftest.err
>> configure:40638: $? = 0
>> configure:40641: test -s conftest
>> configure:40644: $? = 0
>> configure:40657: result: yes
>> configure:40724: gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -march=i586 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -I/usr/include/mjpegtools -I/usr/include/mjpegtools/mpeg2enc -I/usr/include/mjpegtools/mplex -O2 -g -march=i586 -mtune=i686 -fmessage-length=0 -D_FORTIFY_SOURCE=2 -L/usr/lib -L/opt/gnome/lib -lglib conftest.c -lm -lz -ldl -lmjpegutils >&5
>> configure:40730: $? = 0
>> configure:40734: test -z
>> || test ! -s conftest.err
>> configure:40737: $? = 0
>> configure:40740: test -s conftest
>> configure:40743: $? = 0
>>
>
>
>
> rgds, Rainer
>
> Peter Czanik schrieb:
>
>> Hello,
>> Yes, it's there in the chroot-ed environment created by y2pmbuild. The
>> problem is, that for some reason, the related part of configure does not
>> have -I/usr/include/mjpegtools, and this way it can not find the
>> includes from that directory. Why is it no problem outside of y2pmbuild,
>> or better: why is it problem for y2pmbuild? Bye,
>> CzP
>>
>> Rainer Lay wrote:
>>
>>> search in the config.log for your problem, i.e. mjpegtools/yuv4mpeg.h
>>> In line 3619, you will find a message, that file mjpeg_types.h could not
>>> be found. On my i386 machine, it is installed at
>>> /usr/include/mjpegtools/mjpeg_types.h
>>>
>>> Can you please check this?
>>>
>>> kind regards,
>>> Rainer
>>>
>>> Peter Czanik schrieb:
>>>
>>>
>>>> Hello,
>>>> Wanted to send to the rest of you, not just Henne... And also a URL with
>>>> complete config.log is available at
>>>> http://www.mkk.szie.hu/~czanik/transcode.config.log
>>>> Bye,
>>>> CzP
>>>>
>>>> -------- Original Message --------
>>>> Subject: Re: [packman] transcode
>>>> Date: Sat, 01 Apr 2006 13:43:49 +0200
>>>> From: Peter Czanik <pczanik at fang.fa.gau.hu>
>>>> To: Henne Vogelsang <hvogel at hennevogel.de>
>>>> References: <442C00A0.9060202 at fang.fa.gau.hu>
>>>> <20060401100847.GC26967 at hennevogel.de>
>>>>
>>>>
>>>>
>>>> Hello,
>>>>
>>>> Henne Vogelsang wrote:
>>>>
>>>>
>>>>> Hi,
>>>>>
>>>>> On Thursday, March 30, 2006 at 18:00:32, Peter Czanik wrote:
>>>>>
>>>>>
>>>>>
>>>>>> When I try to compile transcode with y2pmbuild, I get at the end of
>>>>>> configure:
>>>>>>
>>>>>> ERROR: option '--enable-mjpegtools' failed: cannot compile
>>>>>> mjpegtools/yuv4mpeg.h
>>>>>> mjpegtools/yuv4mpeg.h can be found in the following packages:
>>>>>> mjpegtools http://mjpeg.sourceforge.net/
>>>>>>
>>>>>> ERROR: option '--enable-imagemagick' failed: cannot link against
>>>>>> libMagick
>>>>>> libMagick can be found in the following packages:
>>>>>> ImageMagick http://www.imagemagick.org/
>>>>>>
>>>>>> There is no such problem with using plain, old rpmbuild alone. Of
>>>>>> course, I have mjpegtools and ImageMagick in the spec file together
>>>>>> with
>>>>>> the related -devel files. Any idea? Bye,
>>>>>>
>>>>>>
>>>>> Look into the config.log whats going wrong?
>>>>>
>>>>>
>>>> Looked again, and found something strange. -L/usr/X11R6/lib seems to be
>>>> missing from a configure check for some reason. It does not cause
>>>> trouble outside y2pmbuild. The interesting part is:
>>>>
>>>> configure:41715: checking for InitializeMagick in -lMagick
>>>> configure:41745: gcc -o conftest -D_LARGEFILE_SOURCE
>>>> -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -fmessage-length=0
>>>> -D_FORTIFY_SOURCE=2 -O2 -g -fmessage-length=0 -D_FORTIFY_SOURCE=2
>>>> -L/usr/lib -L/opt/gnome/lib -lglib conftest.c -lMagick -lz -lm -llcms
>>>> -ltiff -lfreetype -ljpeg -lXext -lSM -lICE -lX11 -lXt -lbz2 -lpthread
>>>> -lpthread -lm -lz -ldl >&5
>>>> /usr/bin/ld: cannot find -lXext
>>>> collect2: ld returned 1 exit status
>>>> configure:41751: $? = 1
>>>> configure: failed program was:
>>>>
>>>> And for mjpegtools:
>>>> configure:39346: checking mjpegtools/yuv4mpeg.h usability
>>>> configure:39358: gcc -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
>>>> -D_FILE_OFFSET_BITS=64 -O2 -g -fmessage-length=0
>>>> -D_FORTIFY_SOURCE=2 -O2 -g -fmessage-length=0 -D_FORTIFY_SOURCE=2
>>>> -I/usr/include conftest.c >&5
>>>> In file included from conftest.c:132:
>>>> /usr/include/mjpegtools/yuv4mpeg.h:29:25: error: mjpeg_types.h: No such
>>>> file or directory
>>>> /usr/include/mjpegtools/yuv4mpeg.h:33:27: error: mjpeg_logging.h: No
>>>> such file or directory
>>>> In file included from conftest.c:132:
>>>> /usr/include/mjpegtools/yuv4mpeg.h:465: error: expected ')' before
>>>> 'level'
>>>> configure:39364: $? = 1
>>>> configure: failed program was:
>>>>
>>>> The files are there, just -I/usr/include/mjpegtools is missing. Why does
>>>> it work, when not using y2pmbuild? Bye,
>>>> CzP
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Packman mailing list
>>>> Packman at links2linux.de
>>>> http://www.links2linux.de/cgi-bin/mailman/listinfo/packman
>>>>
>>>>
>>>>
>>>>
>>
More information about the Packman
mailing list