[packman] wma not functioning in openSUSE-11.2

Cristian Morales Vega cmorve69 at yahoo.es
Sun Nov 15 16:23:37 CET 2009


2009/11/15 oldcpu <oldcpu at opensuse-forums.org>:
> Manfred Tremmel wrote:
>> I've downloaded the "Allegro" example and played with xine, vlc and
>> mplayer without any problem. The video "niceday.wmv" makes a little bit
>> problems mplayer has no video when playing niceday.wmv (Video: no
>> video), xine and vlc only play I-frames ([wmv3 @ 0xfd42f0]Old WMV3
>> version detected, only I-frames will be decoded) but Sound is ok in any
>> case.
>>
>> What output do you get, when you try to play one of this two files from
>> a konsole window ("xine niceday.wmv" or "vlc  niceday.wmv" or "mplayer
>> niceday.wmv")?
>>
> I can play both .wma and .wmv on 11.1 with xine, MPlayer and ffplay on
> 11.1 with no problem. Vlc will not play the .wmv video portion (but will
> play audio) on neither 11.1 nor 11.2.
>
> The results below are from 11.2 (and results are consistent on 2
> different PCs (different hardware) with 11.2 - suggesting I am making a
> systemic mistake if I am making a mistake):
>
> MPlayer playing the .wma (I only hear very very faint scratching/static
> at maximum volume - possibly system noise):
>
> oldcpu at athlon:~/temp> mplayer BachCPE_SonataAmin_1.wma
> MPlayer dev-SVN-r29796-4.4-openSUSE Linux 11.2 (i686)-Packman (C)
> 2000-2009 MPlayer TeamCan't open joystick device /dev/input/js0: No such
> file or directory
> Can't init input joystick
> mplayer: could not connect to socket
> mplayer: No such file or directory
> Failed to open LIRC support. You will not be able to use your remote
> control.
>
> Playing BachCPE_SonataAmin_1.wma.
> ASF file format detected.
> [asfheader] Audio stream found, -aid 1
> Clip info:
> title:
> author:
> copyright:
> comments:
> ==========================================================================
> Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
> AUDIO: 22050 Hz, 2 ch, s16le, 32.0 kbit/4.54% (ratio: 4003->88200)
> Selected audio codec: [ffwmav2] afm: ffmpeg (DivX audio v2 (FFmpeg))
> ==========================================================================
> AO: [oss] 22050Hz 2ch s16le (2 bytes per sample)

Perhaps the device is already being used by something else? Would be a
good idea to change the audio output default to ALSA in the package.
Try with "mplayer -ao alsa"

> MPlayer playing the .wmv (I get the video, but again no sound except for
> very faint scratching/static (system noise ? ) at max volume:
>
> oldcpu at athlon:~/temp> mplayer niceday.wmv
> MPlayer dev-SVN-r29796-4.4-openSUSE Linux 11.2 (i686)-Packman (C)
> 2000-2009 MPlayer TeamCan't open joystick device /dev/input/js0: No such
> file or directory
> Can't init input joystick
> mplayer: could not connect to socket
> mplayer: No such file or directory
> Failed to open LIRC support. You will not be able to use your remote
> control.
>
> Playing niceday.wmv.
> ASF file format detected.
> [asfheader] Audio stream found, -aid 1
> [asfheader] Video stream found, -vid 2
> VIDEO: [WMV3] 320x240 24bpp 1000.000 fps 250.0 kbps (30.5 kbyte/s)
> Clip info:
> title:
> author:
> copyright:
> comments:
> ==========================================================================
> Opening video decoder: [dmo] DMO video codecs
> DMO dll supports VO Optimizations 0 1
> DMO dll might use previous sample when requested
> Decoder supports the following formats: YV12 YUY2 UYVY YVYU RGB8 RGB555
> RGB565 RGB24 RGB32
> Decoder is capable of YUV output (flags 0x1b)
> Movie-Aspect is undefined - no prescaling applied.
> VO: [vdpau] 320x240 => 320x240 Planar YV12
> Selected video codec: [wmv9dmo] vfm: dmo (Windows Media Video 9 DMO)
> ==========================================================================
> ==========================================================================
> Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
> AUDIO: 44100 Hz, 2 ch, s16le, 65.6 kbit/4.65% (ratio: 8205->176400)
> Selected audio codec: [ffwmav2] afm: ffmpeg (DivX audio v2 (FFmpeg))
> ==========================================================================
> AO: [oss] 44100Hz 2ch s16le (2 bytes per sample)

Same thing.

> vlc playing the .wmv - obtain audio with no video:
>
> olcpu at athlon:~/temp> vlc niceday.wmv
> VLC media player 1.0.3 Goldeneye
> [0x80ed6f8] main interface error: option x11-display does not exist
> [0x804f510] main libvlc: Running vlc with the default interface. Use
> 'cvlc' to use vlc without interface.
> [0x81031f0] main interface error: option x11-display does not exist
> Old WMV3 version detected, only I-frames will be decoded
> [0x826a880] freetype spu text error: failed to load font file
> /usr/share/fonts/truetype/FreeSerifBold.ttf
> commandline read: vlc
> commandline read: niceday.wmv
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.2.8 |~~~~~~~~~~~~~~~~~~~~~~~~~~

┬┐? "option x11-display does not exist" doesn't sound pretty. Probably
the problem is in your vlc config... but this problem should happen to
you with ANY video, not just WMV.
Delete/move the config from ~/.config/vlc.




More information about the Packman mailing list